View source for ENA2060 Amplifier - Basic configuration

{{S}}
This article describes the basic configuration on how to get started with the '''[[ENA2060 Amplifier|ENA2060]]''' Amplifier. 

For a detailed configuration guide, see the article [[ENA Amplifier Configuration (SIP)]].

==Configure the amplifier==
Configuration of the amplifier can be done manually via the amplifier’s web interface or automatically with DHCP provisioning via a TFTP server. <br>
After making sure that the amplifier is connected to the same LAN and logical subnet as your PC, follow the procedure described below. <br>

When the amplifier is connected to the network, the IP address is automatically obtained in one of two ways:

*An IP address is obtained from a DHCP server if there is one.
*If there is no DHCP server, an IP address in the range 169.254.x.x will be assigned.

To be able to hear the amplifier announce its IP address:

#Either connect a 100 V speaker to Channel 1 on the 100V Audio Line or connect a 50-ohm speaker (or headset) to channel output 1 (pins 14 and 15) on the Multi-Connector
#Ensure that the amplifier is not registered to any SIP server
#After powering up the amplifier, short input 1 between pins 7 and 13 on the Multi-Connector

*The connected speaker will now announce the amplifier’s IP address

===Main Settings===
Configure the network settings and the time settings:

#Open a web browser and enter the amplifier’s IP address
#Log in with username: '''admin''' and password: '''alphaadmin'''
#Select '''Main''' > '''Main Settings'''

[[File:ENA2060 MainSettings.PNG|thumb|left|700px|Main Settings]]
<br style="clear:both;" />


*'''IP Settings:''' Enter IP address, Subnet mask and Gateway as minimum. 
*'''Time Settings''': Enable NTP and enter NTP server IP address. Select Region and Zone.

===SIP Settings===
The amplifier support up to three SIP accounts; Channel 1, Channel 2 and Input Channel. 

See the article [[ENA_Amplifier_Configuration_(SIP)#Account.2FCall|ENA Amplifier Configuration (SIP)]] on how to configure the SIP accounts.