View source for ENA2x00-AC2 Status LEDs

{{AIS}}
The [[ENA2100-AC2 Amplifier]] and [[ENA2200-AC2 Amplifier]] has '''status LED indicators''' in the front panel:

[[File:ENA2x00 LEDS.png|thumb|left|300px|ENA2x00-AC2 - Status LEDs]]
<br style="clear:both;" />

* '''Power''': Steady green light when the amplifier is powered on
* '''Amp''': Steady amber when one or both speaker lines are monitored (either in manual or continuous mode). Otherwise off.
* '''Line''': The amberfault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See [[ENA Amplifier - Monitoring]]. The Fault LED is lit during the startup sequence
* '''Gnd''': This amber LED will be lit if there is a Ground Fault detected

In addition each channel has a vu meter
* '''Ch1''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 1
* '''Ch2''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 2

[[Category: Public Address - Features and configuration]]