View source for Event Viewer - Manual Device Configuration

{{L}}
1.Click Configure > New Device

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - ADDING A NEW DEVICE.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Adding a new device to Event Viewer</td>
</tr>
</table>

2. Click "Enter Vipedia hostname and IP"

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Manual Setup.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Clicking "Enter Vipedia hostname and IP</td>
</tr>
</table>

3. Enter the hostname and IP address of the device/devices you wish to add > Add Device

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Entering IP Address and Hostname.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Entering example IP address and Hostname of the device/devices to be monitored</td>
</tr>
</table>

4. Upon successful connection to the device/devices, they should say Online: and highlight green under "Monitored Devices" > Save Changes

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Successful Connection to Device.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Entering IP address and hostname of device/devices to be monitored</td>
</tr>
</table>

5. Once the changes have been saved, you should be able to close the Configuration window and Event Viewer should begin monitoring the device/Devices.