View source for Exigo 1.5 Release Notes

= Exigo 1.5.3.1 =

 Release status: Official, available
 Release date: 02.02.2022
 Software collection file: EXIGO-1.5.3.1.zip

== Software included in EXIGO-1.5.3.1.zip ==

{| border="1"
|+
|'''Product'''
|'''Version'''
|'''Product description'''
|-
|VSF-Turbine
|VSFT-PA.6.3.3.1
|Firmware for the following devices: ESC1 (Secondary System Controller), ENA2100, ENA2200 AC2, ENA2400 AC2, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM.
|-
|AlphaSys Firmware
|13.0.3.13
|Firmware for the ESC1 (Primary System Controller/AMC-IP board)  alpha-sys_13.0.3.13.apkg,  bsp_32.2.3.6.apkg
|-
|VS-EMT Exigo Management Tools
|EMT-1.6.3.0
|Configuration tool, installed on a Windows PC
|-
|VS-DEVICE-MIB
|201806190000Z
|SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools
|-
|}
<br>

== Bugfixes and improvements ==
====MTN-3673 Correct SLM channel in LET communication is now used====
The status in both channels are now correctly reported.

====MTN-3650 Noise now removed when releasing PTT with use of PAM1H on Exigo ECPIR-3P====

== Known Issues ==
====MTN-3565 When booting up an AB system, the controller comes up with "buzzer active" with no faults====
This happens on the A controller. Click the wheel to silence the "buzzer".

= Exigo 1.5.3.0 =

 Release status: Official, available
 Release date: 24.11.2021
 Software collection file: EXIGO-1.5.3.0.zip

== Software included in EXIGO-1.5.3.0.zip ==

{| border="1"
|+
|'''Product'''
|'''Version'''
|'''Product description'''
|-
|VSF-Turbine
|VSFT-PA.6.3.3.0
|Firmware for the following devices: ESC1 (Secondary System Controller), ENA2100, ENA2200 AC2, ENA2400 AC2, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM.
|-
|AlphaSys Firmware
|13.0.3.13
|Firmware for the ESC1 (Primary System Controller/AMC-IP board)  alpha-sys_13.0.3.13.apkg,  bsp_32.2.3.6.apkg
|-
|VS-EMT Exigo Management Tools
|EMT-1.6.3.0
|Configuration tool, installed on a Windows PC
|-
|VS-DEVICE-MIB
|201806190000Z
|SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools
|-
|}
<br>

== New Features and Enhancements ==
====EPB-303 ENA2x00 AC2 released====
From Exigo 1.5.3.0 version the ENA2x00 AC2 are supported. To learn more about the new amplifiers please go to https://www.zenitel.com/product. Please note that ENA2x00 AC2 are not yet supported in SIP and ICX AlphaCom mode.

== Bugfixes and improvements ==
====MTN-3539 SNMP temperature is now displayed correctly====

====MTN-3467 Global system settings override device settings====
Notification is added to system settings page to warn user that saving system settings overrides local settings.

====MTN-2266 Refresh issue related to tick tone fixed====
When a tick tone was started from amplifier web, the button label was not refreshed when another activity stopped the tick tone. The web indicated that tick tone was still active. This is now fixed.

====MTN-2172 Tick tone will now be played out on access panels which is part of a zone====

== Known Issues ==
====MTN-3565 When booting up an AB system, the controller comes up with "buzzer active" with no faults====
This happens on the A controller. Click the wheel to silence the "buzzer".

[[Category:Release notes]]
[[Category: Exigo Release Notes]]