View source for Grandstream HT818

{{AEIPS}}
[[Image:HT818.PNG|right|500px|thumb]]
HT818 is an Analog Telephone Adapter (ATA) with 8 FXS ports.  This device allows for the connection of 8 PSTN style telephone to ICX-AlphaCom, AlphaCom or IC-Edge platforms.

=Licensing=
To use the HT-818 with ICX-AlphaCom or AlphaCom, you require 1 SIP Station License per FXS port (ICX:1002600700, AlphaCom:1009643001)<br>
For IC-EDGE, you require a SIP Client Extension License per FXS port (1009661201)

=Configuration=

==Initial LAN Connection==
Connect the LAN port to the network.<br>
The default IP Address of the device is 192.168.2.1 and there is a DHCP Server operating on the LAN port.<br>
Configure your PC Network Interface for DHCP, or a static IP Address of 192.168.2.2 with Subnet Mask 255.255.255.0 <br>
{{obs|You can also choose to connect the WAN port to a network with DHCP Server and use the IVR menu to discover the IP Address.  Instructions for this are available from the [Grandstream_HT801] page}}

==Web Configuration==
Login with password admin.  You can change the password from the Advanced Settings page.<br>
[[Image:HT818_1.PNG|left|600px|thumb]]
<br style="clear:both;" />


===WAN Port IP Address Settings===
Set a Static IP Address for the WAN port from the Basic Settings.  Apply this change and reboot the device<br>
Move the network connection into the WAN port and continue configuration.  The LAN port is now left disconnected.
Press Apply and then Reboot the unit
[[Image:HT801_6.PNG|left|600px|thumb]]
<br style="clear:both;" />

===SIP Profile Settings===
The HT818 can manage connections to 2 SIP Servers in parallel with the 8 lines distributed to these profiles as required.
Edit Profile 1 and configure the following;
*Account Active to Yes
*Primary SIP Server: IP Address of the ICX or EDGE controller
*Outbound Proxy: Same as the Primary SIP Server
[[Image:HT818_2.PNG|left|600px|thumb]]
<br style="clear:both;" />

*Set preferred codec to be “PCMU” (G711μlaw) on all choices
[[Image:HT801_3.PNG|left|300px|thumb]]
<br style="clear:both;" />


===Line Monitoring===
To speed up detection of a failed SIP connection to the HT818, reduce the Registration Expiry to 1 minute, with Reregistration occuring 20 seconds before expiry.
[[Image:HT801_7.PNG|left|600px|thumb]]
<br style="clear:both;" />

===Dial Plan===
To speed up dialed extension time, set the Dial Plan to 2, 3 or 4 digit numbering by placing 2, 3 or 4 'x' in the Dial Plan field. Here, the example is for 3 digit numbering with Group Call.
[[Image:HT801_5.PNG|left|600px|thumb]]
<br style="clear:both;" />

===FXS Port Settings===
In the FXS Port tab, set the following;
*User ID: The Directory Number as configured in the ICX or IC-EDGE Controller
*Authenticate ID: Same as the User ID
*Authenticate Password: The password as configured in the IC-EDGE Controller.  Enter 0000 for ICX-AlphaCom (This field is not used by ICX-AlphaCom)
*Name: Any Name to identify this account
*Profile: Set the extension to the desired SIP Server profile
[[Image:HT818_3.PNG|left|600px|thumb]]
<br style="clear:both;" />


===Hotline Call===
If you have a device without keypad, and you need the unit to place a call when the handset is lifted, configure the Off Hook Autodial from the FXS Port Settings

[[Category: ICX-AlphaCom - SIP Integration]]
[[Category:AlphaCom - SIP Integration]]