View source for INCA 2.2 - Release Notes

Previous Release - [[INCA 2.1 - Release Notes]]

Next Release - [[INCA 2.3 - Release Notes]]

This document provides the release notes for INCA 2.2 with incremental bug fix releases. The release notes for INCA 2.2 describe new features, improvements and issues fixed after INCA 2.1.

=IP-station 02.02.3.1(2011-16-11)=
 Release: Official, available on request

'''IP Dual Display upgrade file:'''<br />
Image: A100G802D0.02_02_3_1.bin<br />
Checksum: E7151957<br />

'''IP Station Main upgrade file:'''<br />
Image: A100G80200.02_02_3_1.bin<br />
Checksum: 9AFF3E64<br />

''IP Station Main supports all STENTOFON stations except IP Dual Display and IP ARIO''

==IP Dual Display Enhancement==
===Added "dots" in the DAK display===
Added "dots" in the IP Dual Display DAK display to indicate which button belongs to a given line of text (same as for analog Dual Display).
===Enabled Pulse/SIP mode===
Enabled station modes Pulse and SIP for IP Dual Display
===Support for flashing / inverse video===
Added support for flashing / inverse video, see [http://nooslzswiki/alphawiki/index.php5/IND IND] for more details

==DIP Error Corrected==
==={{Bugzilla|283}} Display text bug with quote is fixed===

==={{Bugzilla|605}} Leading space in directory number should not be possible anymore===
==={{Bugzilla|643}} Echo on remote side when using handset is fixed===

==SIP/Pulse Error Corrected==
===Registration failure when backup server is down===
Fixed a bug where the station would not register on Primary Server if it was registered on Backup Server and Backup Server 2 was empty.
===Fixed memory leak during call forwarding===
===Station sending SIP requests with wrong CSeq===
Fixed an error that made the station send SIP requests using a previously used CSeq. This could make the receiving station confuse it with a retransmission instead of a new SIP request.
===The station will now handle 6xx responses on a register message===
===The display will now automatically update when the station is not registered===

==SIP/Pulse Enhancement==
===SIP MESSAGE audio control===
(SIP only) SIP MESSAGE can now control audio direction if "Message Controlled Volume Override Mode" is enabled under Call Settings: 

*SIP MESSAGE ”Audio_receive_only”: Turns the microphone off and loudspeaker on
*SIP MESSAGE ”Audio_send_only”: Turns microphone on and loudspeaker off
*SIP MESSAGE ”Audio_send_receive”: Turns both microphone and loudspeaker on

===Forced Push To Talk mode===
Added option to force station to be in Push To Talk mode under Station Configuration -> Audio Settings.
===The station is now busy while dialing or using handset===

===Call queue===
Calls are now put in a queue when the station is busy. The first call in the queue is shown when the previous call is hanged up. A call is in the queue for a maximum of 20 seconds.
===Language settings===
It is now possible to choose between different languages in the web menu under SIP Configuration -> Language Settings. It is also possible to upload your own translation or download existing translations.
===Improved ringlist===
The ringlist can now setup multiple calls at once and the station ends up in conversation with the first station that answer, while all other calls are cancelled.

===Display user menu===
The user may now configure call forwarding, auto answer and summer time from the menu without requiring password.
===Call history===
Missed calls, Outgoing Calls and Incoming calls will now only show the last call attempt from/to a station (instead of adding a new entry for each call attempt).

===New SNMP traps===
Added new SNMP traps: (Input) Button Pressed, (Input) Button Released, Relay Activated, Relay Deactivated

===New options for input buttons during call===
Added options for Input Buttons in call: End Call / Do Nothing / Send DTMF / Send Text.
===DTMF 0 resets audio direction if Remote Controlled Volume Override is enabled===
Sending DTMF 0 now resets audio to open duplex mode if Remoted Controlled Volume Override is enabled.
===A tone is now played in handset when idle===

===A tone is now played on call accepted===

===Status LED now shows when the station is registered / got IP / not registered===
===Renamed "update" to "refresh" in the webserver===
===Added "Press M to Transfer" when transferring===
===Added "Press M to Answer" when the station is ringing===

==Pulse Error Corrected==
===Pulse station would display Backup Servers in the web and display===
===Sound during high load===
The sound should not lag during high load anymore.

==Pulse Enhancement==
===Push to talk is now always enabled for Pulse stations===
===Busy override===
Calling stations may now do busy override if a remote station is busy and the profile is allowed to use busy override. Busy override puts the calling station first in the queue and hangs up the previous call.
===Group call===
It is possible to use up to 4 group calls. Using group call requires that you configure who are allowed to start a group call in Server Management -> Profiles settings, then add stations in Group Call settings. The group calls can have 4 priorites: LOW, NORMAL, HIGH, EMERGENCY. The sound in a group call with LOW/NORMAL priority are not play during normal calls. HIGH priority group call is mixed with normal calls. EMERGENCY priority group calls are played out with max volume and normal calls are muted.  
===Outgoing group calls now show nickname===
===Server ringlist configuration===
It is now possible to configure the ringlist of all Pulse stations at the same time from Server Management -> Ringlist.
===Directory display menu shows allowed group calls===

==Known Issues==
==={{Bugzilla|494}} Multicast does not work without a default gateway defined===
Workaround is to use the Alphacom IP address or Pulse Server IP address as gateway. Note that group calls require multicast in Pulse and (depending on configuration) Alhpacom mode.
==={{Bugzilla|663}} Webcall does not work when "Select Line" is configured in DAK settings===
==={{Bugzilla|665}} Wrong configuration in Advanced configuration->Updates reboots the station===
{{Bugzilla|665}} Removing a number in the IP address field under Advanced configuration-->Updates then clicking save will reboot the station each time that webpage is loaded.
==={{Bugzilla|675}} Show no arrow parameter is not supported in IP Dual Display===
===Changing to a different language requires reboot of the stations===
===RFC2833 does not work for stations in Pulse mode===
Workaround is to use SIP INFO or to set the station in SIP mode.

[[Category: Release notes]]