View source for INCA Masterstation PCB LED Indicators

== Status LED ==
LED3 – Bicolor SMD LED on board component side.
[[File:MasterStationKit Indications1.png|left|thumb|400px|Status LED]]
<br style="clear:both;" />
*'''Blinking 2 red + 1 green:''': Station has no connection to the ICX-AlphaCom Server.
*'''Blinking 1 red + 2 green:''': Station connected but NOT registered in the ICX-AlphaCom Server.
*'''Blinking 3 green:''': Station connected and registered in the ICX-AlphaCom Server.

== Power LED ==
LED6 – Yellow SMD LED on board component side.
[[File:MasterStationKit Indications2.png|left|thumb|400px|Power LED]]
<br style="clear:both;" />
* Light:  13VDC board power OK. 
* No light:  13VDC board power faulty if no other LEDs are lit.
 
Possible reasons: 
* 24 VDC or PoE not connected
* Faulty board

== LAN LEDs ==
'''Left LED:'''<br>
[[File:IP Master Indications 4.PNG|left|thumb|200px|Left LED]]
<br style="clear:both;" />
* Steady light:  Ethernet connection OK 
* Blinking:     Ethernet traffic 
* No light:    No Ethernet connection

'''Right LED:'''<br>
[[File:IP Master Indications 5.PNG|left|thumb|200px|Right LED]]
<br style="clear:both;" />
* Light:    100 Mbit Ethernet connection
* No light:  10 Mbit Ethernet connection

[[Category:Station Indication LEDs]]