View source for IP Desktop with Video Display - Release Notes

'''Note:''' These release notes are for the ''LCD screen'' in the [[IP Desktop Station with Video Display - 1408001635]].

Release notes for the IP desktop station is here: [[:Category:INCA Release notes|INCA Release notes]].


=== Version 2.4 ===
* Improved compatibility with the TCIV station. Due to an unexpected FIN packet the connection was disconnected without the socket resources released.
* Increased socket count for better network performance

=== Version 2.3 ===
* Performance optimization for the UART interface between the Desk Station and the display
** FreeRTOS Update V9.0.0
** CMX-CSOS changed Task-TCBs to static
** UART-Drv of DTC-FIFO changed due to Overflow in HW-RX-Buffers, since the ISR was called too late.

=== Version 2.2 ===
* Fixed a bug where display text fragments were erroneously displayed
* Added a touch calibration dialog to the display

=== Version 2.1 ===
*  Fixed a display bug when restarting the station via display

=== Version 2.0 ===
*  Added SIP-/PULSE-Support
*  Revised display handling and output

=== Version 1.13 ===
*  Fixed an index error in the camera type list
*  Fixed an endless loop when trying to access an invalid camera URL
*  The resync timer for the camera stream will now be stopped, when  syncronisation is successful

=== Version 1.12 ===
*  Fixed a bug when entering an IP address and a subnet mask that don't "fit"

=== Version 1.11 ===
*  Added factory reset via display
*  Increased the length of the camera type name in the dynamic camera type list to 100 characters
*  Increased the number of cameras to 80
*  Increased camera name to 15 characters

=== Version 1.10 ===
*  Removed the MJPG streaming path for Grundig cameras
*  Added a dynamic list for up to 3 custom camera types including streaming path

=== Version 1.9 ===
*  Fixed a bug where some display texts weren't cleared correctly
*  Added the MJPG streaming path for Grundig cameras

=== Version 1.8 ===
*  Fixed a bug where, in manual camera selection, the first element in the list always required a passcode, even when passcode authentication was disabled
*  Changed the URL for Axis cameras from "mjpg/video.mjpg" to "axis- cgi/mjpg/video.cgi"
*  Changed the MJPG stream function to be compatible with older non-RFC-compliant Axis cameras
*  Changed the behavior of the LED (the "auo" DIP message does no longer turn off the LED)
*  Fixed a web server bug that was causing problems with digest authentication under IE9+
*  The "aue" DIP message is now ignored
*  Changed the fallback settings for username and password to "admin"/"alphaadmin" 
*  Fixed a bug that incorrectly reconnected a camera, when another camera is manually selected during a connected call
*  Changed the LED time base
*  The station now displays an error screen when trying to stream a video in the wrong format/resolution
*  Fixed a timing problem when trying to connect to the camera of an incoming call, when manual camera selection is active

=== Version 1.7 ===
*  Added detection of missing DIP messages
*  Changed font to a fixed width font
*  Increased camera count to 48
*  Added manual camera selection with passcode authentication via display
*  Added automatic camera switching, if more than one camera is added to a remote station
*  Overhauled the UI and web interface
*  Added a download/upload functionality for the camera list
*  The station does not need to reboot anymore, after changing the settings
*  Added factory reset via web interface

=== Version 1.6 ===
*  Fixed a bug where the display wasn't cleared correctly in some cases
*  Font improvements (narrow characters are now centered instead of left aligned)

=== Version 1.5 ===
*  Implemented encryption of the firmware file
*  Workflow adaptation

=== Version 1.4 ===
*  Implemented DIP protocol via internal serial interface
*  Implemented bootloader with firmware upload via web interface

=== Version 1.3 ===
*  Fixed a bug where the LEDs weren't correctly updated in some scenarios

=== Version 1.2 ===
*  Fixed a problem with the web server, that could cause problems, if someone tries to access the web interface, while the device has initiated a reboot
*  Fixed a bug where the LEDs weren't correctly switched off when the state changed from "incoming call" to "idle"

=== Version 1.1 ===
*  Fixed a network bug in DHCP mode
*  Improved network stability

=== Version 1.0 ===
* First release


[[Category: Release notes]]