View source for IP Heavy Duty V2 Connections

{{AEIPS}} [[File:IP Heavy Duty V2.png|thumb|350px|The IP Heavy Duty Stations]]
== Main connectors ==
To access these connectors the frontplate must be removed.

{|border="1"
|width="150px"|LAN
|10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
|-
|AUX || 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera.
|-
|Input/Output || Pluggable screw terminal
|-
|Local Power || If PoE is not available, the station can be powered from a 24-48 VDC local power supply, idle 1.8W, max. 12W
|-
|}

== Power Supply ==
The [[IP Heavy Duty Station]] supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. 

If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply.

== Connections ==
There are five relevant connectors on the IP heavy Duty station PCB:
* '''P1'''  RJ45 LAN port is for connecting to the data network

* '''P2''': RJ45 AUX port is for connecting to auxiliary equipment such as a PC

* '''P3''': Secondary power input 24-48VDC
[[File:TKIE Connections4.png|500px|right|thumb]]
* '''P5''': 6-pin terminal for relay outputs for additional call indication, etc.
** Pin 1 COM relay 1 (Common)
** Pin 2 NO relay 1 (Normal Open)
** Pin 3 NC relay 1 (Normal Closed)
** Pin 4 COM relay 2(Common)
** Pin 5 NO relay 2 (Normal Open)
** Pin 6 NC relay 2 (Normal Closed)

* '''J8''': 9-pin plug-on terminal for Handset.
** Pin 1/2: Hook switch
** Pin 4/5: Handset Mic
** Pin 6/7: Handset Speaker

* '''J9''': Keyboard connector.
** See [[Keyboard_matrix_-_TKIE-3|keyboard matrix article]] for details.

For more details see [[Turbine Extended Board Connectors]].

[[Category: Turbine Connections]]