View source for ITS-1 - Software Upgrade

{{AEIPS}}This article describes how to upgrade the software of the [[ITS-1]] via the web interface of the station. 

<br style="clear:both;" />
==Procedure==
# [[Downloads#Stations_and_Devices|Download]] the software file for ITS-1 to your PC and unzip it.
# Log on to the ITS-1 Station web interface.
# Select '''Maintenance''' > '''Upgrade'''
# In the '''Upgrade via Manually Upload''' section, select '''Upload''', and browse to the unzipped file

[[File:ITSV-4 5 Firmware Upgrade.png|thumb|left|700px|Upload new software via the station web interface]]
<br style="clear:both;" />

The file will now be uploaded to the station. The web interface shows "''Uploading...''" during this process. When the file has been uploaded (approx. 5 minutes), the station will shut down and install the software. The installation progress is shown in the display of the station (0 - 100 %). When the installation is finished, it will start up using the new software.

== How to find the.. ==
* '''IP Address''': Push on the touch screen, and select '''Settings''' > '''Status''' > '''Network status''' and make a note of the IP address.
* '''Current software version''': Push on the touch screen, and select '''Settings''' > '''Status''' > '''System Info'''. The current software version is listed under '''System version'''.


[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]