View source for ITSV-1 - Software Upgrade

{{AEIPS}}This article describes how to upgrade the software of the [[ITSV-1|ITSV-1 station]] via the web interface of the station. 

==Procedure==
# [[Downloads#Stations_and_Devices|Download]] the software file '''gxv3240fw.bin''' to your PC.
# Log on to the ITSV-1 Station web interface.
# Select '''Maintenance''' > '''Upgrade''', and choose "Firmware Upgrade Via:" '''Manual Upload'''
# Select '''Upload''', and browse to the '''gxv3240fw.bin''' file

[[File:ITSV upgrade.png|thumb|left|500px|Upload new software via the station web interface]]
<br style="clear:both;" />

The file will now be uploaded to the station. The web interface shows "''Uploading...''" during this process. When the file has been uploaded (approx. 5 minutes), the station will shut down and install the software. The installation progress is shown in the display of the station (0 - 100 %). When the installation is finished, it will start up using the new software.

== How to find the.. ==
* '''IP Address''': On the station touch display, select '''Settings'''. Scroll down to '''About phone''', and then down to '''IP Address'''.
* '''Current software version''': On the station touch display, select '''Settings'''. Scroll down to '''About phone''', and then down to '''System version'''.


[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]
[[Category:INCA - Restore Factory Defaults and Software Upgrade]]