View source for MPP - Mail to Pocket Pager

{{AI}} 
<br>
== Syntax ==

 MPP  <"pager-address"/pager-id>  <source.phys.no>  <"mail-text"/mail-id> [<beepcode>] [<no-transm>] [<prior>]

* Receiving pager: 
** <pager-id> is configured [[pager number]] 1 - 600. 
** Or the address of the pager receiver in "", in record type 1 of ESPA 4.4.4 message. Settings for pager number 1 is used. This option introduced in AMCD 10.52.
* <source.phys.no> is [[Physical number]] considered as sender of paging, used for filling in predefined mails. Not used for Free text mails, use 0.
* Text sent to pager (in record type 2 of ESPA 4.4.4 message)
** Mail text: Free text (maximum 128 characters) in quotes. (Prior AMCD 10.52 max 16 characters.)
** or a [[Predefined AlphaCom mails]] number
* <beepcode> : 0-9  Beep code sent to paging system, in record type 3 of ESPA 4.4.4 message.
* <no-transm> : 1, 2.. Number of transmissions,  code sent to paging system, in record type 5 of ESPA 4.4.4 message.
* <prior> : 1 , 2 or 3: Priority sent to paging system, in record type 6 of ESPA 4.4.4. 1 = Alarm; 2 = High; 3  = Normal


== Examples ==

 MPP 2 0 "Temp. alarm" – Send text-message to pager 2
 MPP "1024" 0 "Temp. alarm" – Send text-message to pager with address "1024" 
 MPP 1 3 10 - Send Call-me message (10) from station 3 to pager 1

[[Category: Pocket pager]]
[[Category:Event Handler]]
[[Category:Built-In Action Commands]]