View source for PNCI - Public Telephone Interface

{{Obsolete}}

 This product is replaced by the AudioCodes MP-11x

[[image:PNCI Public Telephone Interface.jpg|thumb|150px|PNCI - Public Telephone Interface]]

== Features ==
* Incoming and outgoing calls between intercom and public/private telephone network, or on dial-up tie-line between two intercom exchanges.
* Two-wire analogue interface (loop start).
* From touch-tone telephones, intercom functions such as group call and voice mail are available.
* Selective dialling to any intercom station, or direct dialling to switchboard intercom.
* Tone or voice message prompt for telephone callers using selective dialling.
* With data signalling, five levels of access are programmable for each intercom station.
* Ring signal to PNCI can activate light or buzzer.
* 100 short numbers for speed dialling.
* Housed for wall mounting.

== Description ==
Each Public Network Connection Interface (PNCI) unit allows
one conversation at a time. Up to 32 units can be connected
to one intercom exchange.<br>
The audio interface requires a normal subscriber connection
in the intercom exchange. E-wire or data signalling is available:
data signalling enables functions specific to each intercom
subscriber.<br>
If power to the PNCI unit or intercom exchange is switched
off, a bypass relay can connect the incoming line to a
standby telephone.<br>
The PNCI is available in different versions for the following
countries:<br>
Norway/General 100 9400 100<br>
Sweden 100 9400 110<br>
Finland 100 9400 120<br>
Denmark 100 9400 130<br>
Germany 100 9400 140 <br>
(50 94 00 14)<br>
Switzerland 100 9400 210<br>
Austria 100 9400 240<br>

== Installation ==
[[image:PNCI Installation.jpg|left|thumb|250px|]]<br>
<br style="clear:both;" />


== Wiring ==
[[image:PNCI Wiring.jpg|left|thumb|250px|]]

[[Category:Discontinued Products]]