View source for Password (ENA Amplifiers)

{{A}}
The '''web password''' and the '''PIN code''' of the ENA Amplifier can be configured:
* [[Logging into an IP Station|Log into the amplifier]]
* Select '''Station Administration''' > '''Change Password'''.

[[File:ENA Password.PNG|thumb|left|500px]]
<br style="clear:both;" />

===Web Password===
The ''Web Password'' is the password you need to use in the web browser of your PC to get access to the web interface of an ENA amplifier.
*'''User:''' The default username '''admin''' can be changed here
*'''Old Password:''' Enter the old password for security. Default is '''alphaadmin'''
*'''New Password:''' Enter a new password
*'''Confirm New Password:''' The new password must be confirmed to avoid misprint

Password can only contain numbers and letters, no other symbols allowed. <br>
Maximum length is 10 characters.

A factory reset will reset to default password.

=== Device GUI PIN ===
By default the display menu of the amplifier can be accessed without any pin code. However, it is possible to enable pin code access. Two levels can be defined, Read or Full Access.
* '''PIN protect GUI''': When enabled you need to insert a PIN code to access the display menus 

Two users can be defined. For each user:
* '''User Name''': Any text
* '''PIN''': The pin code for accessing the display menu
* '''Access Level''': Read Access or Full Access