View source for Restore Factory Defaults - Zenitel IP Station

{{AEIPS}}A Zenitel IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to obtain an IP address via DHCP or to a Static IP address.

== Software reset ==
Factory default settings can be [[Restore Factory Defaults - From the device web interface|restored from the web interface]].

== Hardware reset ==
===Reset to Factory Default - IP address from DHCP===
<div style="text-align:left;"> <youtube width="300" height="180">6Kph8SmbYYc</youtube>  </div>
<br><br>
__NOTOC__
During the factory Default procedure the station will count numbers in its loudspeaker.

# '''Press and hold any button''', then power up the station.
# At the '''count 1''', release the button
# At the '''count 5''' press and hold the button. 
# At the '''count 0''' release the button. If there is no 0 count, the procedure has failed and you have to start again


After the station has started up, press the '''call button''', and the station will speak its IP address

[[File:Turbine Count5.JPG|thumb|300px|left|Factory Default with IP address from DHCP server]]
<br style="clear:both;" />

====Factory default values====

*Station IP address: Obtained from a DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
*Username: '''admin'''
*Password: '''alphaadmin'''
*Mode of operation: '''Edge'''

===Reset to Factory Default - Static IP===
During the factory Default procedure the station will count numbers in its loudspeaker.

# '''Press and hold any button''', then power up the station.
# At the '''count 1''', release the button
# At the '''count 3''' press and hold the button. 
# At the '''count 0''' release the button. If there is no 0 count, the procedure has failed and you have to start again


After the station has started up, press the '''call button''', and the station will speak its IP address

[[File:Turbine Count3.JPG|thumb|300px|left|Factory Default with Static IP Address]]
<br style="clear:both;" />

====Factory default values====

*Station IP address: '''169.254.1.100'''
*Username: '''admin'''
*Password: '''alphaadmin'''
*Mode of operation: '''Edge'''

[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]