View source for TCIV Dimensions & Mounting Instructions


{|border="1"
|width="250px"|&nbsp;
|width="250px"|'''Dimensions (WxHxD)'''
|width="150px"|'''Weight'''
|-
|TCIV || 180 x 120 x 70 mm || 1.0 kg
|-
|TCIV after flushmount || 180 x 120 x 20 mm ||
|-
|TCIV with onwall box || 180 x 120 x 82 mm ||
|-
|}

=TCIV Compact Station Dimensions=
[[File:TCIV Dimensions 1.PNG|400px|''TCIV Video Station - Front view'']]
[[File:TCIS Dimensions 1.PNG|200px|''TCIV Video Station - Side view'']]

<br style="clear:both;" />

=Onwall Surface Mounting=
==On-Wall Surface Mount Back Box - TA-1==
Mounting holes are to be drilled as shown.

Max. recommended screw diameter: ISO M6 or ANSI 1/4". Screw length must be greater than 25 mm or 1". A4 stainless steel socket head screws/bolts are recommended. Max. recommended screw head diameter: 9.5 mm or 3/8".

Optional nylon washers for extra protection against corrosive effects between surfaces are provided. They should be placed at the bottom of the mounting holes.
Grommets and an M20 cable gland are provided.

[[File:TCAS Mounting-1.PNG|500px|''Onwall backbox Mounting holes - Side view'']]
[[File:TCAS Mounting-2.PNG|200px|''Onwall backbox - Side view'']]

<br style="clear:both;" />

==On-Wall Surface Mounting Procedure==
 '''NOTE! The gasket MUST be mounted to seal the station!'''

[[File:TCIV Mounting 1.png|500px|''Onwall mounting - exploded view'']]

:1. Mount the back box onto the wall
:2. Fit the gasket onto the back box with the ridged side facing down
::- Plug the Ethernet cable into the RJ-45 port on the station
:3. Mount the Turbine station onto the back box with the M5 fasteners provided

 '''Ensure the station is mounted vertically with the microphone aperture facing down'''

 '''Ensure there is enough clearance under the station so that the microphone aperture is not smothered'''

 '''Use the grommets and M20 cable gland provided for the cable holes on the back box'''

=Flush Mounting=
==Flush Mount 2-Gang Back Box - TA-2==
[[File:TA-2 dimensions.PNG|''TA2 2-Gang backbox dimensions'']]

 '''Note!''' It is recommended to utilize back boxes with weep holes at the bottom

<br style="clear:both;" />

==Flush Mount Bracket - TA-5==
Fits US 2-GANG electrical boxes. Recommended screw diameter: up to M4 (5/32"). Use screw recommended by back box manufacurer.

[[File:TCAS Mounting-5.PNG|''TA-5 Mounting Bracket dimensions'']]
[[File:TCAS Mounting-6.PNG|''TA-5 Mounting Bracket'']]

 '''Note!''' The TA-5 Bracket is mandatory for flush mounting.

<br style="clear:both;" />

==Flush Mounting Procedure==
 '''NOTE! The gasket MUST be mounted to seal the station!'''

[[File:TCIV Mounting 2.png|500px]]

:1.  Mount the 2-gang back box into the wall
:2.  Mount the bracket onto the back box
:3.  Fit the gasket onto the bracket with the ridged side facing down
::–Plug the Ethernet cable into the RJ-45 port on the station
:4.  Mount the Turbine station onto the bracket with the M5 fasteners provided

 '''Ensure the station is mounted vertically with the microphone aperture facing down'''

 '''Ensure there is enough clearance under the station so that the microphone aperture is not smothered'''

[[Category: Turbine Dimensions & Mounting Instructions]]