View source for Upload SIP Certificate

{{S}}
This article describes how to upload a certificate to the Turbine station for use with SIP TLS.
==Version 9 and later==
{{note|[[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]] must be enabled}}

*Select '''Advanced Network''' tab and from the left hand menu select '''SIP Certificates'''. Click on '''Choose Certificate''' and browse to the location of the root certificate .pem file. When selected click on the Upload button.
*The root certificate is uploaded and is shown in the list (default.pem).
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Certificate SIP Turbine V9.png|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Uploaded TLS certificate</td>
</tr>
</table>

*Reboot Turbine station ( '''Main''' → '''''Recovery''''' → '''Full Reboot''' )



==Version 8 and earlier==
*Select '''''SIP Configuration''''' tab and from the left hand menu select '''''Certificates'''''. The Turbine certificates are listed. Click on '''''Choose file''''' and browse to the location of the root certificate .pem file. When selected click on the Upload button
*The root certificate is uploaded and is shown in the list (default.pem).
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Certificate SIP Turbine.png|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Uploaded TLS certificate</td>
</tr>
</table>

*Reboot Turbine station ( '''''Station Administration''''' → '''''Reboot''''' → '''''Reboot''''' )

[[Category: SIP intercom - Configuration]]