View source for VSF-Display Series 8.2 Release Notes

* Previous Release - [[VSF-Display Series 8.1 Release Notes]]
* Next Release - [[VSF-Display Series 9.0 Release Notes]]

This document provides the release notes for VSFF8MP 8.2 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.2 describe new features, improvements and issues fixed after vsff8mp-8.1.3.2.

==Release info==
'''Name:''' VSF-Fortitude8 <br>
'''Description:''' vsff8mp is a firmware for Zenitel display series including the following devices: '''ZMK-1'''

The firmware is delivered in two different files:

*vsff8mp-8.2.3.x - Used for standard in-field upgrades
*vsff8mp-prod-8.2.3.x - Used in production- and recovery upgrades.

'''Version:''' 8.2.3.2<br>
'''Date:''' 03.07.2024 <br>
'''Status:''' General Availability<br>

=VSFF8MP 8.2.3.2=
==Fixed Issues==
=== MTN-4471 The IP telephony feature in IC-Edge was not working in version 8.2.3.0 and 8.2.3.1 ===
This is now fixed.

<br>

=VSFF8MP 8.2.3.0=
== Improvements==
===DS-899 SIP/SDP support for dynamic payload for codec L16x48 (HD-Audio)===
Now supporting SIP media attribute L16/48000 with dynamic payload type in range 96..127.
Note! The device needs to be configured in “HD-Audio” mode and voice processing (AEC and NC) is not supported. 

===DS-809 Removed need to apply General Settings in GUI Settings page for Multi-purpose IP Intercom Module ZMK===
Now General Settings are auto applied on save which will cause gui application to reboot to apply settings.

===DS-798 	Improved digital zoom===
Now image is more clear when zooming. Also possible to zoom down to X4. 

<br>

==Fixed Issues==
=== MTN-4435 RTSP stream could stop in some cases=== 
In case of audio issues, RTSP stream would terminate. Now the stream will continue with a moment of silence instead.

=== MTN-4394 Multicast paging working again on intercom devices=== 
Multicast paging was not working on intercom devices when configuring from the webpage. This is now fixed.

=== MTN-4362 Fixed wrong description in Sound Detection settings=== 

The description of “Minimum time before reactivation” is corrected to
“Choose how long to wait before enabling VAD after triggering the DAK key”

Note! This max level is loud and intended for use on heavy noisy environments and when using additional protective ear-plugs.

=== MTN-4228 Turbine devices could not be used with Bosch VMS=== 
There was a problem on Zenitel ONVIF devices that caused software to crash and device to reboot which made Bosch VMS unable to connect to the device.


<br>





[[Category: Release notes]]