View source for Voice Paging from IP Substation

{{AI}}
Scenario:
A group of IP Substations should be able to do voice paging to a group of speakers by simply pressing the call key, speaking and releasing when finished.

==Create the receiver group==
In AlphaPro Groups->Local groups select the group you want to use and press change. Give the group an appropriate name and set gong type to '''No Gong''':

[[File:VoicePaging w PTT 4.PNG|thumb|left|500px]]
<br style="clear:both;" />

Select the Members tab and move the receivers to the '''Members''' list:

[[File:VoicePaging w PTT 1.PNG|thumb|left|500px]]
<br style="clear:both;" />

==UDP Membership==
Put all IP Substation that should be able to do Voice Paging in a common UDP group:

[[File:VoicePaging w PTT 2.PNG|thumb|left|500px]]
<br style="clear:both;" />

==Event Handler==
Use the event handler (Exhcange&System->Events) to create this event:

[[File:VoicePaging w PTT 3.PNG|thumb|left|500px]]
<br style="clear:both;" />

{{Code2|
 IF %chg(1,0)          ->''Check if event goes on or off. If event is ON proceed to next line, else jump to next line after ENDIF''
 $DD L%1.dir L85       ->''Owner of event dials 85''
 $M L%1.dir            ->''Owner of event presses the M key''
 STOP                  ->''Stop event''
 ENDIF                 ->''End of IF statement''
 $MREL L%1.dir         ->''Release M key for owner of event''
 $C L%1.dir            ->''Order owner of event to cancel the call''
}}



[[Category:AlphaCom Applications]]
[[Category: ICX-AlphaCom Applications]]