View source for ZMK-1 Restore Factory Defaults

A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.

Factory default settings can be [[Restore Factory Defaults - From the device web interface|restored from the web interface]], or by a hardware reset as explained below.
<div style="text-align:left;"> <youtube width="300" height="180">HD2ysF8Fpio</youtube>  </div>

__NOTOC__
==Preparation==
# Connect a speaker to the speaker output
# Connect a button to input 1
[[File:Fact reset ZMK.png|thumb|left|200px]]
<br style="clear:both;" />

==Reset to Factory Default Settings with Activated DHCP==
To reset:
# While pressing the button, power up the station by connecting to a PoE switch
# Hold the button until the station audio starts counting, and release the button on '''count 1'''
# Press and hold the button on '''count 5''' and release on '''count 0'''
* If there is no 0 count, the procedure has failed and you have to start again
* Press the '''button''', and the station will speak its IP address

=== Factory default values ===
:Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
:Username: '''admin'''
:Password: '''alphaadmin'''

==Reset to Factory Default Settings with Static IP==
To reset:
# While pressing the button, power up the station by connecting to a PoE switch
# Hold the button until the station audio starts counting, and release the button on '''count 1'''
# Press and hold the button on '''count 3''' and release on '''count 0'''
* If there is no 0 count, the procedure has failed and you have to start again
* Press the '''call button''', and the station will speak its IP address

=== Factory default values ===
:Station IP address: '''169.254.1.100'''
:Username: '''admin'''
:Password: '''alphaadmin'''



[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]