View source for Zenitel IP Speaker connectors

{{AEIS}}
<br clear=all/>
__NOTOC__

[[File:ZIPSConnections.png|thumb|left|500px]]
<br clear=all/>

{| border="1" }
| align="center" style="background:#ffd400;" |'''Pin'''
| align="center" style="background:#ffd400;" |'''Description'''
| align="center" style="background:#ffd400;" |'''''Comment'''''
|-
| 1 || GPIO || General Purpose In Out
|-
| 2 || 5V+ || 5 volt output
|-
| 3 || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker
|-
| 4 || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker
|-
| 5 || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker
|-
| 6 || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker
|-
| 7 || Relay CO || Relay output, Common  
|-
| 8 || Relay NO || Relay output, Normal Open
|-
| 9 || Line in/Mic || Audio input (positive)
|-
| 10 || Line in/Mic || Audio input (negative)
|-
| 11 || GND || Ground connector
|}

{{Note|
Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².
}}

{{Note| 
* Relay switching capacity: Max. 9 watt (Max voltage: 60VAC/60VDC. Max current: 160mA)
* The 5V output can deliver TBA mA current maximum}}
<br clear=all/>

[[Category: Turbine Connections]]