Difference between revisions of "Advanced Output handler (ENA in SIP mode)"

Latest revision as of 13:31, 14 June 2024

Event Triggers

Possible Event Triggers are

DTMF:

Will trigger an event on received DTMF. The action will stay on until next event happens.

Active Call

The station may in some situations have multiple calls, the active call is the call which has media/tone handling.

Can filter so it only triggers the event on

State: Ringing, Queued, In Call, On Hold
Direction: Incoming, Outgoing or Incoming/Outgoing
Channel: Channel 1, Channel 2, Input Channel
Directory Number: Can either directory number or a range for example 100-199

If the state In Call is selected, the output will stay set until the call has ended.

Registration Failed

Event is triggered if registration failed. The output action will be cleared on registration success.

Idle

Event is triggered when station goes back to Idle.

Event Actions

Action control an Output, and multiple IO's can be controlled in the same Event.

States can be: steady off, steady on and timed steady on.

Event action operation

Example

Trigger Output during call to specific number

In this example the output will only be triggered if the amplifier is in a call to the number 401.

Output on during call - example

@@ Line 1: / Line 1: @@
 {{S}}
+[[File:ENA adv output.png|thumb|left|700px]]
+<br style="clear:both;" />
 == Event Triggers ==
 Possible Event Triggers are
@@ Line 8: / Line 11: @@
 *'''Active Call
 :The station may in some situations have multiple calls, the active call is the call which has media/tone handling.
-:Can be filtered so it will only trigger event on certain conditions.
-::*'''State:''' Ringing, Queued, In Call, On Hold
-::*'''Directory Number:''' Can either directory number or a range for example 100-199
-::*'''Direction:''' Incoming, Outgoing or Incoming/Outgoing
-:If the state '''In Call''' is selected, the output will stay set until the call has ended.
-*'''Any Call
-:May match any call. Can for example be used to indicate that a call from a specific station 100 is calling.
 :Can filter so it only triggers the event on
@@ Line 38: / Line 29: @@
 == Event Actions ==
-Action can be either to control Relay or Output, and multiple IO's can be controlled in the same Event.
+Action control an Output, and multiple IO's can be controlled in the same Event.
-States can be same as in basic relay handling: steady off, steady on, slow flash, fast flash and timed steady on.
+States can be: steady off, steady on and timed steady on.
-[[File:aoh_event_action_operation.png|thumb|left|500px|Event action operation]]
+[[File:ENA aoh event action operation.png|thumb|left|700px|Event action operation]]
 <br style="clear:both;" />
-<br>
 ==Example==
-===Trigger Relay during call to specific number===
+===Trigger Output during call to specific number===
-In this example the Relay will only be triggered if the station is in or attempting a call to the number 911.
+In this example the output will only be triggered if the amplifier is in a call to the number 401.
-[[File:aoh_event_example_relayduringcall.png|thumb|left|500px|Relay during call - example]]
+[[File:ENA aoh example.png|thumb|left|700px|Output on during call - example]]
 <br style="clear:both;" />
+[[Category: Public Address - Features and configuration]]
-[[Category: SIP intercom - Configuration]]