Advanced Output handler (ENA in SIP mode)

Event Triggers

Possible Event Triggers are

• DTMF:

Will trigger an event on received DTMF. The action will stay on until next event happens.

• Active Call

The station may in some situations have multiple calls, the active call is the call which has media/tone handling.

Can filter so it only triggers the event on

• State: Ringing, Queued, In Call, On Hold
• Direction: Incoming, Outgoing or Incoming/Outgoing
• Channel: Channel 1, Channel 2, Input Channel
• Directory Number: Can either directory number or a range for example 100-199

If the state In Call is selected, the output will stay set until the call has ended.

• Registration Failed

Event is triggered if registration failed. The output action will be cleared on registration success.

• Idle

Event is triggered when station goes back to Idle.

Event Actions

Action control an Output, and multiple IO's can be controlled in the same Event.

States can be: steady off, steady on and timed steady on.

Event action operation

Example

Trigger Output during call to specific number

In this example the output will only be triggered if the amplifier is in a call to the number 401.

Output on during call - example