Difference between revisions of "1-1a. Exchange startup (practice)"
From Zenitel Wiki
(→Exchange startup) |
(→Exchange startup) |
||
| Line 3: | Line 3: | ||
===Exchange startup=== | ===Exchange startup=== | ||
*Install one ASLT board and the AMC-IP board | *Install one ASLT board and the AMC-IP board | ||
| − | *Connect power | + | *Connect power to start up the server |
| − | *Perform a | + | *Perform a Factory Default Setting of the AlphaCom server |
*Connect two master stations to physical port number 1 and 2 | *Connect two master stations to physical port number 1 and 2 | ||
*Test calling and conversation between the two stations | *Test calling and conversation between the two stations | ||
Revision as of 12:33, 7 November 2017
Exchange startup
- Install one ASLT board and the AMC-IP board
- Connect power to start up the server
- Perform a Factory Default Setting of the AlphaCom server
- Connect two master stations to physical port number 1 and 2
- Test calling and conversation between the two stations