Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(Created page with "Text... ===Related articles === * AlphaWeb - Getting started (practice) Category: AlphaCom practice") |
|||
Line 1: | Line 1: | ||
− | + | [[File:EX1-1b.PNG|left|600px]] | |
+ | <br style="clear:both;" /> | ||
+ | __NOTOC__ | ||
+ | ==Practice 1-1b:== | ||
+ | |||
+ | ===PC Settings:=== | ||
+ | *Configure your computer to have IP address 169.254.1.1 | ||
+ | *Connect the PC to the exchange ethernet port 0 using a standard ethernet cable | ||
+ | |||
+ | ===Login:=== | ||
+ | *Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5 | ||
+ | *Default username: '''''admin''''' | ||
+ | *default password: '''''alphaadmin''''' | ||
+ | |||
+ | ===Configure eth1:=== | ||
+ | *In AlphaWeb go to ''System Configuration -> Interfaces'' | ||
+ | *Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0 | ||
+ | *Press ''Save'' | ||
+ | |||
+ | ===Configure filters:=== | ||
+ | *In AlphaWeb go to ''System Configuration -> Filters'' | ||
+ | *Enable the ports for AlphaWeb and AlphaPro for ''Eth1'' | ||
+ | *Press ''Save'' | ||
+ | *Press ''Apply'' | ||
+ | *Press ''Yes'' | ||
===Related articles === | ===Related articles === | ||
* [[AlphaWeb - Getting started (practice)]] | * [[AlphaWeb - Getting started (practice)]] | ||
− | |||
− | |||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] |
Revision as of 00:00, 1 March 2011
Practice 1-1b:
PC Settings:
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the exchange ethernet port 0 using a standard ethernet cable
Login:
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure eth1:
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0
- Press Save
Configure filters:
- In AlphaWeb go to System Configuration -> Filters
- Enable the ports for AlphaWeb and AlphaPro for Eth1
- Press Save
- Press Apply
- Press Yes