Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(→Configure filters) |
|||
Line 20: | Line 20: | ||
===Configure filters=== | ===Configure filters=== | ||
*In AlphaWeb go to ''System Configuration -> Filters'' | *In AlphaWeb go to ''System Configuration -> Filters'' | ||
− | *Enable the ports for AlphaWeb and AlphaPro for ''Eth1'' | + | *Enable the ports for AlphaWeb (port 80) and AlphaPro for ''Eth1'' |
*Press ''Save'' | *Press ''Save'' | ||
*Press ''Apply'' | *Press ''Apply'' |
Revision as of 17:11, 16 March 2011
PC Settings
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable
Login
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure eth1
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1 and the Subnet Mask to 255.255.0.0
- Press Save
Configure filters
- In AlphaWeb go to System Configuration -> Filters
- Enable the ports for AlphaWeb (port 80) and AlphaPro for Eth1
- Press Save
- Press Apply
- Press Yes