Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(→Configure Ethernet port 1) |
(→Configure Ethernet port 1) |
||
Line 14: | Line 14: | ||
===Configure Ethernet port 1=== | ===Configure Ethernet port 1=== | ||
*In AlphaWeb go to ''System Configuration -> Interfaces'' | *In AlphaWeb go to ''System Configuration -> Interfaces'' | ||
− | *Set the IP address on eth1 to 10.1.10.1/16 (.../16 | + | *Set the IP address on eth1 to 10.1.10.1/16 (...<u>/16</u> means Subnet Mask = 255.255.0.0) |
*Press ''Validiate'', then ''Save & Apply'' | *Press ''Validiate'', then ''Save & Apply'' | ||
[[File:1-1b solution.PNG|500px|thumb|left|AlphaWeb: System Configuration -> Interfaces]] | [[File:1-1b solution.PNG|500px|thumb|left|AlphaWeb: System Configuration -> Interfaces]] |
Revision as of 15:22, 6 March 2014
PC Settings
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable
Login
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure Ethernet port 1
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1/16 (.../16 means Subnet Mask = 255.255.0.0)
- Press Validiate, then Save & Apply
Configure filters
- In AlphaWeb go to System Configuration -> Filters
- Enable the ports for AlphaWeb (http, port 80) and AlphaPro for Eth1
- Press Save
- Press Apply
- Press Yes