Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(→Configure Ethernet port 1) |
|||
Line 27: | Line 27: | ||
[[File:1-1b solution2.PNG|500px|thumb|left|AlphaWeb: System Configuration -> Filters]] | [[File:1-1b solution2.PNG|500px|thumb|left|AlphaWeb: System Configuration -> Filters]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
+ | |||
+ | ===New PC Settings=== | ||
+ | *Configure your computer to have IP address 10.1.10.90 | ||
+ | *Connect the PC to the ethernet port 1 of the AlphaCom | ||
+ | * Access AlphaWeb by typing in the IP address 10.1.10.1 in the address field of the web brwser | ||
+ | |||
<br><br><br><br> | <br><br><br><br> |
Revision as of 10:50, 1 November 2017
PC Settings
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable
Login
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure Ethernet port 1
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1/16 (.../16 means Subnet Mask = 255.255.0.0)
- Press Validate, then Save & Apply
Configure filters
- In AlphaWeb go to System Configuration -> Filters
- For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro
- Press Save
- Press Apply
- Press Yes
New PC Settings
- Configure your computer to have IP address 10.1.10.90
- Connect the PC to the ethernet port 1 of the AlphaCom
- Access AlphaWeb by typing in the IP address 10.1.10.1 in the address field of the web brwser