Turbine Test and Demo Application

Installations of demo software

To install demo software for your Turbine, the following steps must be taken:

1. Open up SSH and TCP port inTurbine IP stastion for demo application
2. Load media files onto Turbine IP station
3. Install demo application on your PC
4. Close SSH port

Open up TCP port inTurbine IP stastion for demo application

• Logon to Turbine IP station
• Check the firewall settings in ”Advanced Network”.
• Open up SSH port
• The Demo protocol port 50010 is not enabled.
• For the Turbine application you must enable ”Demo”.

Load media files onto Turbine IP station

On the Downloads page you will find a turbine-media-demo_3.0.1.3-2_armel.ipk with wav files to be uploaded and installed in each Turbine station. Copy this package to /tmp on target using for example WinSCP. Protocol is SCP. Tool: http://winscp.net/eng/index.php Login to the Turbine consol with protocol SSH. Tool: http://www.chiark.greenend.org.uk/~sgtatham/putty/ Username/password: root/root and do following to install package:

# cd /tmp
# ipkg install turbine-media-demo_3.0.1.3-2_armel.ipk

Install demo application on your PC

https://alphasupport.zenitel.com/alphawiki/fileshare/TurbineCommandClient.zip . Extract .zip files and copy software to a suited folder on your PC. No install needed. Just start the exe-file. Double-click inside the station to set IP address of the station, press ”Connect to Turbine Station” and red color should become green. From my experience you might have to reset the PC to make it work. Close SSH port

• Logon to Turbine IP station
• Check the firewall settings in ”Advanced Network”.
• Open up SSH port