Difference between revisions of "TCIx Connections"
From Zenitel Wiki
(→Front Board - Rear) |
|||
| Line 1: | Line 1: | ||
[[File:TCIS Connections 1.PNG|right|400px]] | [[File:TCIS Connections 1.PNG|right|400px]] | ||
| − | + | [[File:TCIS-X rear.PNG|left|350px]] | |
| − | + | <br style="clear:both;" /> | |
| − | |||
{| border="1" | {| border="1" | ||
| Line 9: | Line 8: | ||
|Secondary Power || 24 VDC (16 – 48 V) secondary power is provided from an external adapter. | |Secondary Power || 24 VDC (16 – 48 V) secondary power is provided from an external adapter. | ||
|- | |- | ||
| − | |Relays || There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. | + | |Relays || There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W |
|- | |- | ||
| − | |Input/Output || 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. | + | |Input/Output || 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
|- | |- | ||
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal | |Audio Line Out || A balanced 600 ohm audio line out with induction loop signal | ||
| Line 20: | Line 19: | ||
* When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. | * When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. | ||
* To make the station speak its IP address, press the call button on the station. | * To make the station speak its IP address, press the call button on the station. | ||
| + | |||
| + | ===Power Supply=== | ||
| + | The Turbine Compact Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. If PoE is not available, the Turbine Compact Station can be connected to a 24 VDC local power supply. | ||
| + | |||
| + | ===Network Connection=== | ||
| + | There is one RJ-45 port located on the Turbine Compact station that is used for PoE/LAN Ethernet connection. | ||
| + | |||
| + | ===Input/Output Connections=== | ||
| + | There are 6 I/O connection options for the Turbine Compact Station. | ||
| + | These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | ||
| + | |||
| + | See also [[Turbine Compact Board Connectors]] | ||
Revision as of 09:00, 12 October 2016
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W |
| Input/Output | 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
Note! Use cables crimped with ferrules for terminal block connectors
- When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the station speak its IP address, press the call button on the station.
Power Supply
The Turbine Compact Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. If PoE is not available, the Turbine Compact Station can be connected to a 24 VDC local power supply.
Network Connection
There is one RJ-45 port located on the Turbine Compact station that is used for PoE/LAN Ethernet connection.
Input/Output Connections
There are 6 I/O connection options for the Turbine Compact Station. These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
See also Turbine Compact Board Connectors