Difference between revisions of "2-2b. CCTV with relay - Event Handler (solution)"
From Zenitel Wiki
(→Solution) |
(→Solution) |
||
Line 12: | Line 12: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | [[File:2-2b solution3.PNG|left|thumb|450px|By setting Call Priority Setup = Low, the call from the Elevator will be forced to Private ringing mode, regardless of the Open/Private status | + | [[File:2-2b solution3.PNG|left|thumb|450px|By setting Call Priority Setup = Low, the call from the Elevator will be forced to Private ringing mode, regardless of the Open/Private status of the Main Guard]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | [[File:2-2b solution4.PNG|left|thumb|450px|By setting Call Priority Setup = Low, the call from the Entrance will be forced to Private ringing mode, regardless of the Open/Private status | + | [[File:2-2b solution4.PNG|left|thumb|450px|By setting Call Priority Setup = Low, the call from the Entrance will be forced to Private ringing mode, regardless of the Open/Private status of the Main Guard]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 16:05, 27 February 2013
Solution
CCTV Control:
- Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.
]]
- A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation, RCO 5 and RCO 6.
- The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).