Difference between revisions of "Hotline Call"
From Zenitel Wiki
(Created page with "=== Hotline Call === Enable the hotline function by selecting the hotline station in the listbox in '''Users & Stations''', select the '''Station Type''' tab, and check the '''Ho...") |
(→Hotline Call Delay) |
||
| Line 19: | Line 19: | ||
[[File:HotlineCallDelay.PNG|thumb|left|500px|Default hotline delay is 5.0 sec. Change from 50 to 0 for immediate call]] | [[File:HotlineCallDelay.PNG|thumb|left|500px|Default hotline delay is 5.0 sec. Change from 50 to 0 for immediate call]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| + | |||
| + | Related Article: [[Hot-line Dialing]] | ||
Revision as of 14:49, 16 December 2013
Hotline Call
Enable the hotline function by selecting the hotline station in the listbox in Users & Stations, select the Station Type tab, and check the Hotline flagg:
In Users & Stations, select the DAK button, and enter the call destination on DAK 7:
If the hotline call should generate a Call Request instead, enter "I 623 I xxx" on DAK 7, where xxx is the target station. If the Call Request should be cleared when replacing the handset, enter "I626 I xxx" on DAK 8, else leave DAK 8 blank.
Hotline Call Delay
By default there is a 5.0 second delay from the handset is lifted until the call is placed. Often you want the call to be placed immediately. To change the delay time, select Exchange & System, System, Calls and Options.
Related Article: Hot-line Dialing