Difference between revisions of "TFIE Dimensions & Mounting Instructions"
From Zenitel Wiki
(→Opening the enclosure) |
(→Opening the enclosure) |
||
| Line 30: | Line 30: | ||
Open the enclosure by pulling the front frame out 5 mm, keeping it parallel to the on-wall box. This is necessary to get clearing for the hinges. | Open the enclosure by pulling the front frame out 5 mm, keeping it parallel to the on-wall box. This is necessary to get clearing for the hinges. | ||
| − | [[File:TFIE opening 3.PNG|thumb|left| | + | [[File:TFIE opening 3.PNG|thumb|left|300px]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Pull the right side of the front frame to fully open the enclosure. Do NOT open the enclosure to the extent that cables between the front and back parts are pulled tight. | Pull the right side of the front frame to fully open the enclosure. Do NOT open the enclosure to the extent that cables between the front and back parts are pulled tight. | ||
Revision as of 13:10, 13 October 2016
| Dimensions (WxHxD) | Weight | |
| TFIE-x | 346 x 178 x 101 mm | 1.9 kg |
| TFIX-x | 346 x 178 x 101 mm | 1.9 kg |
| TKIE-x | 65 x 100 x 25 mm | 0.1 kg |
TFIE/TFIX Extended Station Dimensions
Opening the enclosure
Loosen the 2 screws securing the front frame to the on-wall box.
Open the enclosure by pulling the front frame out 5 mm, keeping it parallel to the on-wall box. This is necessary to get clearing for the hinges.
Pull the right side of the front frame to fully open the enclosure. Do NOT open the enclosure to the extent that cables between the front and back parts are pulled tight.