Turbine Software Upgrade

This article describes how to upgrade the software of the Turbine series of intercom devices from version 3.0.x.x to version 4.2.3.0.

There are two ways of upgrading the software on the Turbine station:

• Using the web interface of the station
• Using the IMT Intercom Management Tool

Using the Web Interface of the station

Prerequisites

1. A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
2. Download software version 3.0.3.5, and unzip the files to a folder on your PC.
3. Download software version 4.2.3.0, and unzip the files to a different folder on your PC.

Upgrade procedure

The upgrade is a two-step process.

• First nstall version 3.0.3.5, then
• Install version 4.2.3.0

1. Start the TFTP server program and click Browse, and select the folder where the 3.0.3.5 software files are located

1. Log on to the IP Station web interface

2. Select Station Administration> Manual Upgrade

3. Enter the IP address of the TFTP server(your PC’s IP address)

4. Enter the prefix (e.g. tsi-3.x.x.x)to the software image files in the Image file field

5. Click Save settings to store the data

The station will now try to contact the TFTP server. If the connection cannot be established or the tftp_test.txt file is missing from the folder, the message TFTP_CONN_ERROR is displayed. If the response is TFTP_CONN_OK the settings are saved, and the Upgrade button will appear.

• Click the Upgradebutton to upgrade the software on the IP station.

The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.

Troubleshooting

In the case where upgrade is not successful it may be due to a windows setting.

For Windows XP: http://www.sysprobs.com/enable-ping-in-xp

For Windows7: http://www.sysprobs.com/enable-ping-reply-windows-7

Coming

Upgrade from tsi-3.0.3.4 or older

To upgrade from version 3.0.3.4 or older to version 4.2.x.x is a two-step process:

1. Upgrade to 3.0.3.5 using the station web interface

• Unzip the tsi-3.0.3.5.zip to a folder, and point to this folder in the TFTP Server.
• In the station web, enter image file: tsi-3.0.3.5
• Follow the instructions on the screen

Load tsi-3.0.3.5 via the station web interface

2. Upgrade to 4.2.3.0 using the station web interface

• Unzip the sti-prod-4.2.3.0.zip to a folder, and point to this folder in the TFTP Server.
• In the station web, enter image file: tsi2sti-4.2.3.0.ipk

Installing tsi2sti-4.2.3.0.ipk via the station web interface

3. Upgrade to 4.2.2.x using the station web interface