Difference between revisions of "Turbine Software Upgrade"
From Zenitel Wiki
(→Upgrade procedure) |
|||
| Line 35: | Line 35: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | 4. Enter the IP address of the '''TFTP server'''(The IP address of your PC) | |
| − | + | 5. Enter the prefix (e.g. '''tsi-3.x.x.x''')to the software image files in the '''Image file''' field | |
| − | + | 6. Click '''Save settings''' to store the data | |
The station will now try to contact the TFTP server. If the connection cannot be established or the ''tftp_test.txt'' file is missing from the folder, the message ''TFTP_CONN_ERROR'' is displayed. If the response is ''TFTP_CONN_OK'' the settings are saved, and the '''Upgrade''' button will appear. | The station will now try to contact the TFTP server. If the connection cannot be established or the ''tftp_test.txt'' file is missing from the folder, the message ''TFTP_CONN_ERROR'' is displayed. If the response is ''TFTP_CONN_OK'' the settings are saved, and the '''Upgrade''' button will appear. | ||
Revision as of 16:00, 20 October 2015
This article describes how to upgrade the software of the Turbine series of intercom devices from version 3.0.x.x to version 4.2.3.0.
There are two ways of upgrading the software on the Turbine station:
- Using the web interface of the station
- Using the IMT Intercom Management Tool
The second method allowS mass upgrade.
Contents
Using the Web Interface of the station
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Download software version 3.0.3.5, and unzip the files to a folder on your PC.
- Download software version 4.2.3.0, and unzip the files to a different folder on your PC.
Upgrade procedure
The upgrade is a two-step process.
- First install version 3.0.3.5, then
- Install version 4.2.3.0
1. Start the TFTP server program and click Browse, and select the folder where the version 3.0.3.5 software files are located
2. Log on to the Turbine Station web interface. Default login credentials are admin and alphaadmin
3. Select Station Administration > Manual Upgrade
4. Enter the IP address of the TFTP server(The IP address of your PC) 5. Enter the prefix (e.g. tsi-3.x.x.x)to the software image files in the Image file field 6. Click Save settings to store the data
The station will now try to contact the TFTP server. If the connection cannot be established or the tftp_test.txt file is missing from the folder, the message TFTP_CONN_ERROR is displayed. If the response is TFTP_CONN_OK the settings are saved, and the Upgrade button will appear.
- Click the Upgradebutton to upgrade the software on the IP station.
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
Troubleshooting
In the case where upgrade is not successful it may be due to a windows setting.
For Windows XP: http://www.sysprobs.com/enable-ping-in-xp
For Windows7: http://www.sysprobs.com/enable-ping-reply-windows-7
Coming
Upgrade from tsi-3.0.3.4 or older
To upgrade from version 3.0.3.4 or older to version 4.2.x.x is a two-step process:
1. Upgrade to 3.0.3.5 using the station web interface
- Unzip the tsi-3.0.3.5.zip to a folder, and point to this folder in the TFTP Server.
- In the station web, enter image file: tsi-3.0.3.5
- Follow the instructions on the screen
2. Upgrade to 4.2.3.0 using the station web interface
- Unzip the sti-prod-4.2.3.0.zip to a folder, and point to this folder in the TFTP Server.
- In the station web, enter image file: tsi2sti-4.2.3.0.ipk
3. Upgrade to 4.2.2.x using the station web interface