Difference between revisions of "TKIS Restore Factory Defaults"
From Zenitel Wiki
(Created page with "A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can e...") |
(→Reset to Factory Default Settings with Activated DHCP) |
||
Line 4: | Line 4: | ||
To reset: | To reset: | ||
− | + | # Connect a speaker to the speaker output | |
− | + | # Connect a button to input 1 | |
− | + | # While pressing the button, power up the station by connecting to a PoE switch | |
− | + | # Hold the button until the station audio starts counting, and release the button on '''count 1''' | |
− | + | # Press and hold the button on '''count 5''' and release on '''count 0''' | |
+ | * If there is no 0 count, the procedure has failed and you have to start again | ||
+ | * Press the '''button''', and the station will speak its IP address | ||
− | [[File: | + | [[File:TKIS2SpeakIP.png|thumb|left|200px]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 11:41, 13 October 2016
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Contents
Reset to Factory Default Settings with Activated DHCP
To reset:
- Connect a speaker to the speaker output
- Connect a button to input 1
- While pressing the button, power up the station by connecting to a PoE switch
- Hold the button until the station audio starts counting, and release the button on count 1
- Press and hold the button on count 5 and release on count 0
- If there is no 0 count, the procedure has failed and you have to start again
- Press the button, and the station will speak its IP address
Factory default values
- Station IP address: (determined by DHCP server)
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button, and the station will speak its IP address.
Factory default values
Station IP address: 169.254.1.100 Username: admin Password: alphaadmin