Starting Up Turbine EX Station: Difference between revisions

Revision as of 13:06, 2 February 2017

The Turbine EX Station (TFIX) features an embedded web interface, which allows users to log in via a standard web browser.

To start up the station, your PC and the IP station have to be connected together via a switch using network cables:

When the Turbine Station is connected to the network, the IP address of the station is automatically obtained in one of two ways:

An IP address is obtained from a DHCP server if there is one.
If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.

To make the station speak its IP address:

Note: Speaking IP address is only available when the station is not yet registered

At commissioning, the IP station needs to be configured to enable it to be used as:

Revision as of 12:30, 18 October 2016 (view source) Roarl (talk \| contribs) (Created page with "The Turbine EX Station features an embedded web interface, which allows users to log in via a standard web browser. To start up the station, your PC and the IP station have...")		Revision as of 13:06, 2 February 2017 (view source) Asle (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	The Turbine EX Station features an embedded web interface, which allows users to log in via a standard web browser.		The Turbine EX Station (TFIX) features an embedded web interface, which allows users to log in via a standard web browser.

	To start up the station, your PC and the IP station have to be connected together via a switch using network cables:		To start up the station, your PC and the IP station have to be connected together via a switch using network cables: