Difference between revisions of "IP Hotline Connections"

Revision as of 11:14, 25 October 2016

The table below is an overview of the main connectors involved when installing the IP Hotline Station.

LAN (P1)	10/100 Mbps RJ45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
AUX (P2)	10/100 Mbps RJ45 port for auxilliary equipment such as PC or IP Camera.
Input/Output	Pluggable screw terminal
Local Power	Pluggable screw terminal, 17-27 VDC Idle 4W, max. 8W

To access these connectors the front cover must be removed.

The IP Hotline Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.

If PoE is not available, the IP Hotline Station can be connected to a 24 VDC local power supply.

See Related Article INCA Master Station Kit Board Connectors for local power supply connections.

@@ Line 22: / Line 22: @@
 See Related Article [[INCA Master Station Kit Board Connectors]] for local power supply connections.
-== Input/Output Connections ==
-There are I/O connection options for all IP Stations, except the IP Desktop Station and the IP Dual Display Station. These I/O connections include:
-:* 3 digital inputs (P4)
-:* 1 logical output (TP9)
-:* 1 relay output (P3)
-<br/>
-These connections are used as relay contacts for door lock control and external I/O devices.
-For pin settings on the P3 and P4 connectors on the station board, see See Related Article [[IP Station Board Connections and Indications]].
 [[Category: INCA Connections]]