Difference between revisions of "Pulse Server"
From Zenitel Wiki
(Created page with "One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any...") |
|||
| Line 1: | Line 1: | ||
| + | {{P}} | ||
One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[Intercom stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation. | One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[Intercom stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation. | ||
Revision as of 14:24, 10 January 2017
One of the intercom stations in a Pulse system must be set as the Pulse Server. The Pulse Server is acting as a server for the other intercom stations in the system. Any IP Intercom station can be a Pulse Server. There must be only one Pulse Server in the installation.
Note that you get extended functionality when using a Turbine station with firmware 4.2 or higher as Pulse Server.
The Pulse Server must have a static IP address (not dynamically assigned via DHCP).