AlphaCom 12.05 - Release Notes: Difference between revisions
From Zenitel Wiki
| Line 7: | Line 7: | ||
If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept. | If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept. | ||
== Release info == | == Release info 12.5.2.0 == | ||
'''Name:''' | '''Name:''' bsp_32.00.3.1_AS_12.5.2.0.apkg <br> | ||
'''Description:''' | '''Description:''' This software includes both AlphaSys and BSP 32.0.3.1 <br> | ||
'''Version:''' | AlphaSys 12.5.2.0 software only runs on AMC 11 hardware and require use of STIC <br> | ||
'''NVRAM Version:''' 12.5 (Note: NVRAM config is kept if upgrading from a previous 12.x version) <br> | |||
'''Date:''' 20.03.2018 <br> | '''Date:''' 20.03.2018 <br> | ||
'''Status:''' Limited Availability <br> | '''Status:''' Limited Availability <br> | ||
Revision as of 14:13, 20 March 2018
Abstract
This article provides the release notes for AlphaSys 12.5 with incremental bug fix release.
Software in production: AMC 11.2.3.10
Note: For each software version the NVRAM version is listed. If the NVRAM version is different, the AlphaCom InterCom configuration will get default configuration, and then you must do a SendAll from AlphaPro to restore the configuration. All AlphaWeb configuration will be kept.
Release info 12.5.2.0
Name: bsp_32.00.3.1_AS_12.5.2.0.apkg
Description: This software includes both AlphaSys and BSP 32.0.3.1
AlphaSys 12.5.2.0 software only runs on AMC 11 hardware and require use of STIC
NVRAM Version: 12.5 (Note: NVRAM config is kept if upgrading from a previous 12.x version)
Date: 20.03.2018
Status: Limited Availability
- NOTE 1 : This is not an upgrade to v. 11.6.x.x versions. It should not be installed in same location as older AlphaPro versions.
- NOTE 2: Since AlphaPro version 11.5.x.x there is no support for serial communication which is needed to configure AMC9. For AMC9 and mixed networks AlphaPro 11.2.x.x must be used!