Difference between revisions of "Dual Display Station - 1007007000"

Latest revision as of 13:29, 15 August 2018

The Dual Display Station is an analog intercom station. It is connected to an ASLT line card in an AlphaCom XE7, AlphaCom XE20 or AlphaCom XE26 server using 2 pairs of wires.

Highlights

Desktop master station with full access to all features in the VINGTOR-STENTOFON AlphaCom XE exchange
The station may use up to 90 Direct Access Keys (DAK) on 9 dynamic DAK pages
The dialing keys have letters to be used for search facility in the intercom directory and display text editing
The station has 4 dynamic navigation keys for quick access to system menus and directory entries
Status information, guidance and menus are shown on a large 4 line graphic display

Requirements

The Dual Display is supported from AlphaCom software version 9 and higher

Wiring

The cabling from the AlphaCom server to the intercom station is star wiring. Two twisted pairs of wires are required. The maximum distance depends on the cable diameter:

0.5 mm wires: 1.4 km
0.6 mm wires: 2.0 km
0.9 mm wires: 4.0 km

The station cable is not a 1:1 cable!

For details on connection at the AlphaCom server side, see ASLT - AlphaCom Subscriber Line Board

@@ Line 1: / Line 1: @@
-[[image:Dual Display Station 1007007000 (2).jpg|thumb|150px|]]
+{{A}}
-== Features ==
+[[File:DualDisplayFront2.png|right|600px]]
-* Desktop master station with full access to all features in the STENTOFON AlphaCom exchange.
-* The station may use up to 40 Direct Access Keys (DAK) on 4 pages with information text for each DAK on a display. Standard is 20 DAK keys.
-* The dialing keys have letters to be used for search facility in the intercom directory and display text editing.
-* The station has 4 specific navigation keys for quick access to system menus and directory entries.
-* Status information, guidance and menus are shown on a large 4 line graphic display.
-== Description ==
+The Dual Display Station is an analog intercom station. It is connected to an [[ASLT|ASLT line card]] in an [[AlphaCom XE7]], [[AlphaCom XE20]] or [[AlphaCom XE26]] server using 2 pairs of wires.
-The STENTOFON Master Station with Dual Display is
-designed for table-top mounting in bank/finance and
-office environments.
-The physical size makes it easy to place on desks with
+== Highlights ==
-limited space.
+* Desktop master station with full access to all features in the VINGTOR-STENTOFON AlphaCom XE exchange
+* The station may use up to 90 Direct Access Keys (DAK) on 9 dynamic DAK pages
+* The dialing keys have letters to be used for search facility in the intercom directory and display text editing
+* The station has 4 dynamic navigation keys for quick access to system menus and directory entries
+* Status information, guidance and menus are shown on a large 4 line graphic display
+<br>
-An optional noise cancelling gooseneck microphone
+== Requirements ==
-module can be mounted in noisy environments.
+* The Dual Display is supported from AlphaCom software version 9 and higher
+<br>
-Most functions and codes are the same as for the
-STENTOFON stations in the InterGuard range.
-The two easy-to-read displays and navigation buttons
-ensure quick and easy access to the person you want
-to reach and the functions you want to perform.
-The direct access keys are easily programmed from
-the station and can be changed at any time. The
-display may be edited to show your personal text.
-== Installation ==
-[[image:Dual Display Station 1007007000.jpg|thumb|150px|]]
-The station can be installed in any
-Stentofon AlphaCom or AlphaCom
-E system.
-To benefit from the new features
-in the dual display station, the
-AMC card in your AlphaCom
-exchange must be revision 9 with
-SW version 9.00 or later. In earlier
-versions the text in the DAK
-display can not be edited and the
-info display will show two lines
-only.
 == Wiring ==
-[[image:Dual Display Station 1007007000 Wiring.jpg|thumb|150px|]]
+The cabling from the AlphaCom server to the intercom station is star wiring. Two twisted pairs of wires are required. The maximum distance depends on the cable diameter:
-The Master Stations with Dual
+* 0.5 mm wires: 1.4 km
-Display are installed by connection
+* 0.6 mm wires: 2.0 km
-to a normal line point in the
+* 0.9 mm wires: 4.0 km
-exchange by using a station cable
-with RJ45 connectors.
-Note that some RJ45 connectors
-may be cross-connected internally.
-== Application ==
-[[image:Dual Display Station 1007007000 Application.jpg|thumb|150px|]]
-The station is primary intended to
-be used as a table top station in
-bank / finance environment and
-offices where quick access to
-several preprogrammed extension
-numbers and functions is essential.
-The direct access key display text
+[[image:WiringAnalog7007.png|left|800px|]]
-can be edited
+<br style="clear:both;" />
-== The principal ==
+{{note| The [[Station cable for 4 wire analogue station|station cable]] is not a 1:1 cable! }}
-* DAK-labelling is stored in the station memory
+For details on connection at the AlphaCom server side, see [[ASLT - AlphaCom Subscriber Line Board]]
-:* Labels are sent from the exchange as display data
-* The station recognises 10 DAK-pages
-* DAK-page 3 reserved for the 4 function keys
-:* DAK-buttons 21-24, buttons 25-30 are unused
-* The dialling code sent on the abcd-wires depends on the selected DAK-page
-== DAK-keys in the AMC ==
+<br>
-* Each station has a DAK-table with 24 lines (from AMC 9)
+== Dimensional Drawing ==
-:* 20 lines are for general use (1-20)
+[[File:7007Dimensions1.PNG|400px|Side view]]
-:* 4 lines are reserved for navigation keys
+[[File:7007Dimensions2.PNG|120px|Rear view]]
-* More DAK keys can be reached via re-direction
+<br style="clear:both;" />
+<br>
-== DAK-redirection ==
+==Related articles==
+* [[Dual Display Configuration]]
+* [http://www.zenitel.com/product/dual-display-station Additional Documentation on Zenitel.com]
+* [[Gooseneck Microphone - 1007007010|Gooseneck microphone (optional)]]
-* DAK page 1 is used for redirection of DAK keys from other stations
+[[Category: Analogue 4-wire Stations]]
-* DAK page 2 is not in use
-[[Image:Bilde.jpg|left|200px|thumb]]
-DAK page 1 is DAK 1-10 on station 501<br\>
-DAK page 2 is DAK 1-10 on station 502<br\>
-DAK page 3 is reserved<br\>
-DAK page 4 is DAK 1-10 on station 504<br\>
-DAK page 5 is DAK 1-10 on station 505<br\>
-DAK page 6 is DAK 1-10 on station 506<br\>
-DAK page 7 is DAK 1-10 on station 507<br\>
-DAK page 8 is DAK 1-10 on station 508<br\>
-DAK page 9 is DAK 1-10 on station 509<br\>
-DAK page 10 is DAK 1-10 on station 510

Difference between revisions of "Dual Display Station - 1007007000"

From Zenitel Wiki

Latest revision as of 13:29, 15 August 2018

Contents

Highlights

Requirements

Wiring

Dimensional Drawing

Related articles