Call and Relay operation by URL: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{ | {{S}} | ||
It is possible to operate the relay on a station by an URL. | It is possible to initiate a call and to operate the relay on a station by an URL. | ||
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. | In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. | ||
* Call station number 10: | |||
<nowiki>http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10</nowiki> | |||
* Cancel the call: | |||
<nowiki>http://10.5.2.138/goform/zForm_webcall?message=Stop+call</nowiki> | |||
*Activate the relay: | *Activate the relay: | ||
http://10.5.2.138/goform/zForm_webcall?activate=Activate | <nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate</nowiki> | ||
*Deactivate the relay: | *Deactivate the relay: | ||
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate | <nowiki>http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate</nowiki> | ||
*Activate the relay with a timer (here 1 second): | *Activate the relay with a timer (here 1 second): | ||
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1 | <nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1</nowiki> | ||
*Activate the relay with a timer (here 20 seconds): | *Activate the relay with a timer (here 20 seconds): | ||
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20< | <nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20</nowiki> | ||
[[Category: | [[Category: SIP intercom - Configuration]] | ||
Latest revision as of 09:01, 13 September 2019
It is possible to initiate a call and to operate the relay on a station by an URL.
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
- Call station number 10:
http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
- Cancel the call:
http://10.5.2.138/goform/zForm_webcall?message=Stop+call
- Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
- Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
- Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
- Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20