Actions

Difference between revisions of "Physical number 5 and 6 (AlphaCom E7)"

From Zenitel Wiki
Line 1: Line 1:
 +
{{A}}
 
In the [[AlphaCom XE7]] the physical numbers 5 and 6 on the first [[ASLT|ASLT line board]] are enabled for program distribution by default. The potmeters P5 and P6 are used to adjust the input level. Line points 5 and 6 can also be used as normal subscriber points.
 
In the [[AlphaCom XE7]] the physical numbers 5 and 6 on the first [[ASLT|ASLT line board]] are enabled for program distribution by default. The potmeters P5 and P6 are used to adjust the input level. Line points 5 and 6 can also be used as normal subscriber points.
  

Revision as of 13:15, 8 October 2019

AlphaCom icon 300px.png

In the AlphaCom XE7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default. The potmeters P5 and P6 are used to adjust the input level. Line points 5 and 6 can also be used as normal subscriber points.

  • To enable physical number 5 and/or 6 to be used for regular intercom stations:
  • Set jumpers P5 and/or P6 to position 1-2. There are five jumpers for P5, and five jumpers for P6. P5 is for physical port 5, and P6 is for physical number 6.
AlphaCom XE7 backplane


  • In AlphaPro, select Exchange & System -> Boards
  • Change the port setting from ‘Audio program feed’ to ‘Default’
  • Reset the exchange
Set "Port Use" for physical number 5 and 6 to "Default"


Retrieved from "https://wiki.zenitel.com/w/index.php?title=Physical_number_5_and_6_(AlphaCom_E7)&oldid=212906"