Difference between revisions of "TCIS Indication LEDs"
From Zenitel Wiki
(→LED indicators on the printed circuit board) |
|||
| Line 33: | Line 33: | ||
==LED indicators on the printed circuit board == | ==LED indicators on the printed circuit board == | ||
| + | [[File:TCIS LED Status.png|thumb|600px|right|LED indicators]] | ||
| − | |||
| − | |||
===Power LED on the circuit board === | ===Power LED on the circuit board === | ||
Revision as of 11:40, 13 December 2019
Contents
LEDs on Front Panel
Status LEDs
- Bell icon lights yellow when a call is placed and ringing
- Talk icon lights green when a call is active and in conversation
- Door icon lights red when the door is unlocked or relay is active
Talk Icon: Flashing at 1 second intervals:
Station has no connection to the server.
Possible reasons:
- No connection to Ethernet
- Wrong server IP address configured
- Invalid IP address
- No default gateway address or wrong gateway configured
Talk Icon: Flashing at 5 second intervals:
Station has TCP connection to the server, but fail to register.
Reason:
- Station has not been programmed in AlphaPro
LED indicators on the printed circuit board
Power LED on the circuit board
- Steady blue light: The station receives power
Registration status LEDs
- Flashing 2 red + 1 green: Station has no connection to the server.
- Flashing 1 red + 2 green: Station has TCP connection to the server, but fail to register.
- Flashing 3 green: Station connected and registered in the server.
Ethernet Activity & Speed LEDs
Green LED
- Steady light: Ethernet connection OK
- Flashing: Ethernet data traffic
- No light: No Ethernet connection
Yellow LED
- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection