Difference between revisions of "TCIS Indication LEDs"
From Zenitel Wiki
(→LED indicators on the printed circuit board) |
(→LED indicators on the printed circuit board) |
||
| Line 36: | Line 36: | ||
| − | '''Power LED''': '''Steady blue light''': The station receives power | + | '''Power LED''': |
| + | * '''Steady blue light''': The station receives power | ||
| − | + | Registration status LEDs: | |
| − | + | *'''Flashing 2 red + 1 green''': Station has no TCP connection to the server. Check network, cables and IP settings. | |
| − | + | *'''Flashing 1 red + 2 green''': Station has TCP connection to the server, but fail to register. Check account settings in the station and server | |
| − | *'''Flashing 2 red + 1 green''': Station has no connection to the server. | ||
| − | *'''Flashing 1 red + 2 green''': Station has TCP connection to the server, but fail to register. | ||
*'''Flashing 3 green''': Station connected and registered in the server. | *'''Flashing 3 green''': Station connected and registered in the server. | ||
Revision as of 11:42, 13 December 2019
LEDs on Front Panel
Status LEDs
- Bell icon lights yellow when a call is placed and ringing
- Talk icon lights green when a call is active and in conversation
- Door icon lights red when the door is unlocked or relay is active
Talk Icon: Flashing at 1 second intervals:
Station has no connection to the server.
Possible reasons:
- No connection to Ethernet
- Wrong server IP address configured
- Invalid IP address
- No default gateway address or wrong gateway configured
Talk Icon: Flashing at 5 second intervals:
Station has TCP connection to the server, but fail to register.
Reason:
- Station has not been programmed in AlphaPro
LED indicators on the printed circuit board
Power LED:
- Steady blue light: The station receives power
Registration status LEDs:
- Flashing 2 red + 1 green: Station has no TCP connection to the server. Check network, cables and IP settings.
- Flashing 1 red + 2 green: Station has TCP connection to the server, but fail to register. Check account settings in the station and server
- Flashing 3 green: Station connected and registered in the server.
Ethernet Activity & Speed LEDs
Green LED
- Steady light: Ethernet connection OK
- Flashing: Ethernet data traffic
- No light: No Ethernet connection
Yellow LED
- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection