Actions

TKIS Indication LEDs: Difference between revisions

From Zenitel Wiki

(Created page with "=Status LEDs on PCB= thumb|300px|left <br style="clear:both;" /> '''Flashing 2 red + 1 green''' * Station has no connection to the AlphaC...")
 
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=Status LEDs on PCB=
=Status LEDs on PCB=
[[File:TCIS Board Indications 1.png|thumb|300px|left]]
[[File:TKISIndications1.png|thumb|300px|left]]
<br style="clear:both;" />
<br style="clear:both;" />
'''Flashing 2 red + 1 green'''
Two LEDs (green and red) indicates if the station is registered.
* Station has no connection to the AlphaCom server.
*'''Flashing green''': Station is successfully registered to the server/controller
 
*'''Flashing two times red + one time green''' or '''one red + two green''': The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller
'''Flashing 1 red + 2 green'''
* Station connected but NOT registered in the AlphaCom server.
 
'''Flashing 3 green'''
* Station connected and registered in the AlphaCom server.


=Ethernet Activity & Speed LEDs on PCB=
=Ethernet Activity & Speed LEDs on PCB=
[[File:TCIS Board Indications 2.png|thumb|300px|left]]
[[File:TKISIndications2.png|thumb|300px|left]]
<br style="clear:both;" />
<br style="clear:both;" />
'''Green LED'''
'''Green LED'''
Line 23: Line 18:
* No light: 10 Mbit Ethernet connection
* No light: 10 Mbit Ethernet connection


[[Category:Turbine]]
[[Category: Station Indication LEDs]]

Latest revision as of 12:43, 20 November 2020

Status LEDs on PCB

TKISIndications1.png


Two LEDs (green and red) indicates if the station is registered.

  • Flashing green: Station is successfully registered to the server/controller
  • Flashing two times red + one time green or one red + two green: The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller

Ethernet Activity & Speed LEDs on PCB

TKISIndications2.png


Green LED

  • Steady light: Ethernet connection OK
  • Flashing: Ethernet data traffic
  • No light: No Ethernet connection

Yellow LED

  • Steady light: 100 Mbit Ethernet connection
  • No light: 10 Mbit Ethernet connection
MediaWiki spam blocked by CleanTalk.