Difference between revisions of "TCIS Indication LEDs"

Latest revision as of 23:15, 17 January 2021

LEDs on Front Panel

Status LEDs

Bell icon lights yellow when a call is placed and ringing
Talk icon lights green when a call is active and in conversation
Door icon lights red when the door is unlocked or relay is active

Bell, Talk and Door icons

Light in the Call button:

Steady dim light: Station is successfully registered to the server.
Flashing light: The station fails to register. Check the network and network cables, and the IP settings and account settings configuration in the station or in the server.

LED indicators on the printed circuit board

TCIS and TCIV LED Indication
TCIV+ LED Indication

Power LED

One blue LED indicates if the station receives power.

Blue LED on: The station receives power

Ethernet status LEDs

Two LEDs (green and yellow) indicates the status of the ethernet link.

Green LED
- Steady light: Ethernet link is OK
- Flashing: Ethernet link is OK, data traffic
- No light: No Ethernet link. Check the ethernet cable and network switch

Yellow LED
- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection

Registration status LEDs

Turbine TCIS and TCIV series

Two LEDs (green and red) indicates if the station is registered.

Flashing green: Station is successfully registered to the server/controller
Flashing two times red + one time green or one red + two green: The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller

Turbine TCIV+ series

Three LEDs (green, yellow and red) indicates if the station is registered. The yellow LED is not in use. Note that due to the dark housing, the LED's can appear Magenta and White.

Flashing green: Station is successfully registered to the server/controller
Flashing two times red + one time green or one red + two green: The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller

@@ Line 1: / Line 1: @@
-{{APS}}
+{{AEIPS}}
-=LEDs on Front Plate=
+==LEDs on Front Panel==
 '''Status LEDs'''
-:- '''Bell icon''' lights '''yellow''' when a call is placed and ringing
-:- '''Talk icon''' lights '''green''' when a call is active and in conversation
-:- '''Door icon''' lights '''red''' when the door is unlocked or relay is active
-[[File:TCIS Indications 1.PNG|thumb|300px|left]]
-<br style="clear:both;" />
+*'''Bell icon''' lights '''yellow''' when a call is placed and ringing
+*'''Talk icon''' lights '''green''' when a call is active and in conversation
+*'''Door icon''' lights '''red''' when the door is unlocked or relay is active
+[[File:TCIS Indications 1.PNG|thumb|300px|left|Bell, Talk and Door icons]]
+<br style="clear:both;" />
-'''Talk Icon: Flashing at 1 second intervals:'''<br>
+'''Light in the Call button''':
-Station has no connection to the AlphaCom server/exchange.
-Possible reasons:
+*Steady dim light: Station is successfully registered to the server.
-* No connection to Ethernet
+*Flashing light: The station fails to register. Check the network and network cables, and the IP settings and account settings configuration in the station or in the server.
-* Wrong AlphaCom XE IP address configured
-* Invalid IP address
-* No gateway or wrong gateway to the AlphaCom server/exchange
-[[File:TCIS Indications 2.PNG|thumb|100px|left]]
+==LED indicators on the printed circuit board==
-<br style="clear:both;" />
+<gallery mode="traditional" widths="500px" heights="500px" perrow="2">
+File:TCIS-x_LED_Status.png|TCIS and TCIV LED Indication
+File:TCIV+_LED_Status.png|TCIV+ LED Indication
+</gallery>
+===Power LED===
+One blue LED indicates if the station receives power.
+*'''Blue LED on''': The station receives power
-'''Talk Icon: Flashing at 5 second intervals:'''<br>
+===Ethernet status LEDs===
-Station connected but NOT registered in the AlphaCom server/exchange.
+Two LEDs (green and yellow) indicates the status of the ethernet link.
-Reason:
+*'''Green LED'''
-* Station has not been programmed in AlphaPro
+**Steady light: Ethernet link is OK
+**Flashing: Ethernet link is OK, data traffic
+**No light: No Ethernet link. Check the ethernet cable and network switch
-[[File:TCIS Indications 3.PNG|thumb|100px|left]]
+*'''Yellow LED'''
-<br style="clear:both;" />
+**Steady light: 100 Mbit Ethernet connection
+**No light: 10 Mbit Ethernet connection
-=Status LEDs on PCB=
+===Registration status LEDs===
-[[File:TCIS Board Indications 1.png|thumb|300px|left]]
-<br style="clear:both;" />
-'''Flashing 2 red + 1 green'''
-* Station has no connection to the AlphaCom server.
-'''Flashing 1 red + 2 green'''
+====Turbine TCIS and TCIV series====
-* Station connected but NOT registered in the AlphaCom server.
+Two LEDs (green and red) indicates if the station is registered.
-'''Flashing 3 green'''
+*'''Flashing green''': Station is successfully registered to the server/controller
-* Station connected and registered in the AlphaCom server.
+*'''Flashing two times red + one time green''' or '''one red + two green''': The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller
-=Ethernet Activity & Speed LEDs on PCB=
+====Turbine TCIV+ series====
-[[File:TCIS Board Indications 2.png|thumb|300px|left]]
+Three LEDs (green, yellow and red) indicates if the station is registered. The yellow LED is not in use.  Note that due to the dark housing, the LED's can appear Magenta and White.
-<br style="clear:both;" />
-'''Green LED'''
-* Steady light: Ethernet connection OK
-* Flashing: Ethernet data traffic
-* No light: No Ethernet connection
-'''Yellow LED'''
+*'''Flashing green''': Station is successfully registered to the server/controller
-* Steady light: 100 Mbit Ethernet connection
+*'''Flashing two times red + one time green''' or '''one red + two green''': The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller
-* No light: 10 Mbit Ethernet connection
-[[Category:Turbine Indication LEDs]]
+[[Category: Station Indication LEDs]]