Difference between revisions of "Automatic M-key In Group Call"
From Zenitel Wiki
Line 12: | Line 12: | ||
</table> | </table> | ||
− | |||
− | |||
− | |||
0 = Regular group call behaviour, e.g. M-key must be pressed to open the audio path <br /> | 0 = Regular group call behaviour, e.g. M-key must be pressed to open the audio path <br /> | ||
1 = Automatic M-key for all stations initiating the group call <br /> | 1 = Automatic M-key for all stations initiating the group call <br /> | ||
2 = Automatic M-key when SIP stations are initiating the group call<br /> | 2 = Automatic M-key when SIP stations are initiating the group call<br /> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==Additional information == | ==Additional information == |
Revision as of 15:07, 20 May 2022
A Group Call can be configured to start audio without the need of pressing the M-key. This is configurable for each individual group. The setting is available from AlphaPro.
M-key options for group call |
0 = Regular group call behaviour, e.g. M-key must be pressed to open the audio path
1 = Automatic M-key for all stations initiating the group call
2 = Automatic M-key when SIP stations are initiating the group call
Additional information
- Automatic M-key is meant to be used on SIP or special non display stations.
- Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
- Require AMC software 10.30 or later
Back to Feature description