Automatic M-key In Group Call: Difference between revisions

Latest revision as of 14:18, 20 May 2022

A Group Call can be configured to start audio without the need of pressing the M-key. This is configurable for each individual group. The setting is available from AlphaPro.

M-key options for group call

Alternatives:

Regular group call behavior, i.e. M-key must be pressed to open the audio path
Automatic M-key (handsfree operation) for all stations initiating the group call
Automatic M-key when SIP stations are initiating the group call

Additional information

Require AlphaCom software 10.30 or later

Back to Feature description

@@ Line 1: / Line 1: @@
-== Description ==
+{{AI}}
+A [[Group Call]] can be configured to start audio without the need of pressing the M-key. This is configurable for each individual group. The setting is available from [[Groups_(AlphaPro)#Local_Groups|AlphaPro]].
-A [[Groups#Group_Call.2FAnnouncements|Group Call]] can be configured to start audio without the need of pressing the M-key. The parameter to change is not available from [[AlphaPro]], so it has to be changed in the AMC memory (nvram), either via the [[TST]] console or by using the [[Event Handler]].
- TST>>nvram - ex_profile.group[1].flags = 1 (0x01)
+<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
+<tr style="rowspan:2;">
+<td style="display: block; vertical-align: bottom;">[[Image:Group Auto M.png|700px]]</td>
+</tr>
+<tr>
+<td style='background-color:#efefef;'>M-key options for group call</td>
+</tr>
+</table>
-Flags:<br\>
+Alternatives:
-= Regular group call behaviour, e.g. M-key must be pressed to open the audio path <br\>
+* Regular group call behavior, i.e. M-key must be pressed to open the audio path <br />
-= Automatic M-key for all stations initiating the group call <br\>
+* Automatic M-key (handsfree operation) for all stations initiating the group call <br />
-= Automatic M-key when SIP stations are initiating the group call<br\>
+* Automatic M-key when SIP stations are initiating the group call<br />
-== Configuration from Event Handler ==
-[[Image:Automatic M-key for Group Calls.jpg|thumb|right|Enable automatic M-key for group 3 (86) when called from SIP]]
-Use [[System_Status_%28Event_Type%29 | System Status Event]] related to device 65, and the following action string:
- $[[SNV]] Q('''flag''') W1 W11 W('''group number''') W6
-'''flag''' = 0, 1 or 2 as described above<br>
-'''group number''' = 1 - 100
-The programming will take effect after a reset of the exchange.
 ==Additional information ==
-*Automatic M-key is meant to be used on SIP or special non display stations.
+* Require AlphaCom software 10.30 or later<br><br>
-*Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
-* Require AMC software 10.30 or later<br><br>
 Back to [[Feature description]]
+[[Category: ICX-AlphaCom features]]
 [[Category: AlphaCom features]]

Automatic M-key In Group Call: Difference between revisions

From Zenitel Wiki

Latest revision as of 14:18, 20 May 2022

Additional information