Actions

Difference between revisions of "$CALL command used in AlphaNet (Event Handler)"

From Zenitel Wiki

 
(13 intermediate revisions by 8 users not shown)
Line 1: Line 1:
The $CALL command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.<br\> This means that the B-subscriber must be defined in that node as a local or global number.
+
{{AI}}
 +
The [[CALL SETUP|$CALL]] command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.
 +
 
 +
This means that the B-subscriber must be defined in that node as a local or global number.
  
 
Example:
 
Example:
- An external data device (PC) is connected to node 1 <br\>- Station 1234 is node 2<br\>- Station 5678 is node number 3
+
* An external data device (PC) is connected to node 1
 +
* Station 1234 is in node 2
 +
* Station 5678 is in node 3
 +
 
 +
{{Code|$CALL L1234 L5678}}
 +
sets up a call between the stations. Requires that 1234 is defined as global number (83/2) in node 1 and that 5678 is defined as global number (83/3) in node 2
 +
 
  
$Call L1234 L5678 will set up the call betwen the stations. Requires that:<br\>- 1234 is defined as global number (83/2) in node 1<br\>- 5678 is defined as global number (83/3) in node 2
 
  
Alternatively:<br\>$CALL L1234 L(3)5678 will set up the call betwen the stations. Requires that:
+
Alternatively:
<br\>- 1234 is defined as global number (83/2) in node 1
+
{{Code|$CALL L1234 L(3)5678}}
 +
sets up a call between the stations. Requires that: 1234 is defined as global number (83/2) in node 1
  
$call %2.ref C456
+
[[Category: Event Handler]]
 +
[[Category: AlphaNet]]

Latest revision as of 09:58, 1 June 2022

AI.png

The $CALL command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.

This means that the B-subscriber must be defined in that node as a local or global number.

Example:

  • An external data device (PC) is connected to node 1
  • Station 1234 is in node 2
  • Station 5678 is in node 3
$CALL L1234 L5678


sets up a call between the stations. Requires that 1234 is defined as global number (83/2) in node 1 and that 5678 is defined as global number (83/3) in node 2


Alternatively:

$CALL L1234 L(3)5678


sets up a call between the stations. Requires that: 1234 is defined as global number (83/2) in node 1